FS728TPv2 Firmware Version 5.0.2.26

Note: We recommend you to update your wireless drivers to the latest version available from wireless chipset vendor.

New Features:

1. Add an option to specify the direction(s) of traffic to be mirrored under Monitoring>Port Mirroring>Port Mirroring.

Bug Fixes:

1. Improve ICMP PING response time. 

Limitations:

1. None.

Known Issues

1. While the link is up, port cannot be removed from a VLAN if it is also member of a LAG.
   Workaround: Remove the link or remove the port from the LAG first.
2. After setting the maximum number of allowed static locked MAC address to zero (under Security > Traffic Control > Port Security > Interface Configuration), no static MAC address can be added even when port security is disabled.
   Workaround: Change back the "Max Allowed Statically Locked MAC" from 0 to 20.
3. Can’t remove a policy entry completely in the table under QoS > Diffserv > Advanced > Policy Configuration the first time.
   Workaround: Need to select the same entry and click DELETE again

Upgrading

Note: If Window system does have proper XML service pack installed, the browser might not be able to display GUI configuration page. In all of the cases we have seen, error message is displayed after entering the login password. To resolve this issue , please download and install MSXML 4.0 Service Pack 2 from: http://www.microsoft.com/downloads/details.aspx?familyid=3144b72b-b4f2-46da-b4b6-c5d7485f2b42&displaylang=en

The procedure for upgrading the device to the interim image is the same as the regular firmware upgrade. It can be downloaded via a TFTP server or Smartwizard Discovery utility.

1. Start Smartwizard Discovery Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
2. In Smartwizard Discovery window, click Discover to find your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)
3. Highlight the Smart Switch to upgrade and click Firmware Upgrade.
4. Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.

Document Type

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.