Note: This firmware adds support of the new Smart Control Center to the switch. It does not contain any other enhancement or bug fix. Only upgrade to this firmware if you have downloaded and installed the Smart Control Center. The Smart Control Center software can be downloaded here. The upgrade process requires the use of the Smart Control Center software. Once the switch has been upgraded to this firmware, it can only be discovered and managed by the Smart Control Center and can no longer be discovered nor managed by the Smartwizard Discovery Utiltiy.

Bug Fixes

1. Fixed the problem of not able to access the device's WEB GUI through IPSEC VPN.
2. Fixed the problem that switch port cannot be disabled by SNMP
   (OID: .1.3.6.1.4.1.4526.11.11.6.1.2 and OID: .1.3.6.1.2.1.2.2.1.7). 

Known Issues

1. Upgrade can only be done via the port that is a member of VLAN 1.
2. Cannot restore backup configuration by Firefox or Google Chrome. 

Upgrade Instructions:

Warning:  Improper upgrade procedure may cause the device to become inoperable and it will need to be replaced..

1. Upgrade boot code "FS726T_BootCode_SCC.hex" by SmartWizard.
2. Once upgrade complete, power cycle switch. At this moment, system will boot up at boot code mode automatically.
3. Now the unit should be able to discover by SmartControlCeneter and will not be discovered by SmartWizard anymore.
4. Upgrade " FS726T_V2.0.1_14.bin" by SmartContolCenter.