EVA8000 Firmware Version 2.1.83

New Features and Major enhancements:

To Upgrade:

  1. Download the correct firmware using the button below to a convenient place such as your desktop.

    For North America Users only:

    For UK Users only:

    For Australia Users only:

    For users in France, Spain, Belgium & Netherlands:

    For German users only:

    For users in Italy and Sweden only:

  2. Rename the downloaded file to something easy to type: (e.g. EVA8000_V2.1.83NA_WEB.img to eva.bin.)
  3. Copy the eva.bin file to the root of a USB flash drive
  4. Plug the flash drive into the EVA8000.
  5. Ignore the “Scanning” message.
  6. Select More > Supervisor > Update > Specify a location
  7. Key in eva.img file – do NOT erase “/mnt/usb1/.” This is case sensitive which means “Eva.bin” is not the same as “eva.bin.”
  8. Select OK
  9. Do not turn off your EVA8000 until the upgrade process has completed.

 

Document Type:

Downloads > Driver/Software/Firmware
Published 04/20/2009 03:44 PM   |   Updated 10/15/2011 05:09 AM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.