DG834PN Firmware Version 1.03.39

Published Oct 7, 2008

• Not for use in North America!
• Not for use in Germany!

Bug Fixes:

1. Fixed a problem where the Vista UPnP test could fail.
2. Fixed a problem where Firewall Rules by Schedule may not work.
3. Fixed a problem where Address Reservations could not be set on the Advanced LAN Setup Page when using Remote Management.
4. Fixed a problem where Help on the Schedule page referred to a non-existent check box.
5. Added translations in French, German, and Italian for the Disable SIP ALG checkbox on the Advanced WAN Settings page.

To Upgrade

1. To reach the Upgrade menu, click Router Upgrade from the Maintenance section.
2. Download using the button below, saving to a convenient place such as your desktop.
3. Using a browser, log in to the router as admin
4. Under Maintenance, click Router Upgrade
5. Click Browse and locate the upgrade file DG834PN_V1.03.39.img
6. Click Upload
7. Wait for the upgrade progress bar to complete and final prompt to appear.

For problems after upgrading, write all the configuration information that you changed from the defaults. Clear the configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (at least 10 seconds). Then reenter your configuration information manually.

Document Type:

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.