DG834GV Firmware Version 1.02.39

DG834GV Firmware Version 1.02.39

Published: Apr.1, 2008

Note: This firmware is only for Retail DG834GV product in Australia and can not be used for DG834GV product that has been shipped by a service provider or used outside Australia.

Modifications and Fixes:

1. Reduced the PSTN ring delay to 1 ring
2. “CID enable” option on the “Voice Settings” GUI page
3. Additional page for choosing ADSL modulation via GUI – this could be done on the ADSL Settings page:
   • Auto (Multi Mode)
   • ADSL (G.DMT)
   • ADSL2+

Upgrade Instructions

1. Download using the button below to a convenient place such as your desktop. This is a large file!
2. Using a browser, login to the router (the default URL is http://192.168.0.1). The user name is admin, and the default password is password
3. Under Maintenance, click Router Upgrade

   

4. Click Browse and locate the file which you just downloaded: dg834gv_1_02_39_u.img
5. Click Upload
6. Wait for the upgrade progress bar to complete and final prompt to appear.

For problems after upgrading, write all the configuration information that you changed from the defaults. Clear the configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (at least 10 seconds). Then reenter your configuration information manually.

Document Type:

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.