DG834Gv5 Firmware Release Version 6.00.25

New Features / Bug Fixes

  1. Improved ADSL detection
  2. Fixed: auto lock-down mechanism about WPS doesn't work
  3. Fixed: there is no checkout mechanism about "Default DMZ Server" in GR version
  4. Fixed: "Reflesh" button works like the "Apply" button in Log setting page
  5. Fixed: UI can not change to "Wireless Setting" page
  6. Fixed: Edit duplicated static route will cause the previous one disappear
  7. Fixed: UI bug about "Backup Settings" (Language DE)
  8. Fixed: Spelling error about Wireless Card Access List Help (Language DE)
  9. Fixed: Route accept invalid static route
  10. Fixed: Illegal character can be set as PIN number
  11. Fixed: Static Routes duplicated with another cause the edited one disappear
  12. Fixed: Wrong IP address can be added into static route table
  13. Fixed: IP pool can be configured even don't hook "Use Router as DHCP Server"
  14. Fixed: UI can't change to "Wireless Setting" page after click "Apply" button
  15. Fixed: WPS Warning page bug
  16. Fixed: No warning message pop-up without input WEP Passphrase
  17. Fixed: WAN Setup UI bug about DoS
  18. Fixed: NTP server or Visit Blocked Sites IP Address can be set LAN IP address 
  19. Fixed: UI bug about WAN Setup help
  20. Fixed: Turn Access Control On display error
  21. Fixed: Wireless Card Access List Help describe dissimilar with the fact of the function
  22. Fixed: Remote Management address can be inputed invalid IP Address
  23. Fixed: "Disable SIP ALG" still be hooked even press "Cancel" button
  24. Fixed: The MAC of "Use Default Address" is wrong
  25. Fixed: WPS can't terminal first process when second process start
  26. Fixed: Two Same static route can be added

Installation Instructions

  1. To reach the Upgrade menu, click Router Upgrade from the Maintenance section.
  2. Using a browser, login to the router (the default URL is http://192.168.0.1). The user name is admin, and the default password is password.
  3. Click Browse and locate the file which you just downloaded.
  4. Click Upload.
  5. Wait for the upgrade progress bar to complete and final prompt to appear.

For problems after upgrading

  1. Write down all the configuration information which you preveious entered manually. These typically include information from your ISP and security settings.
  2. Clear the configuration by pressing the Factory Defaults pushbutton on the rear panel for 10 seconds, until the Test LED blinks.
  3. Reenter your configuration information manually.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.