DG834GT Firmware Version 1.03.23

Modifications and Bug Fixes
  1. Fixed a problem where DHCP times out with certain ISPs after 24 hours, requiring a reboot to refresh.
  2. Fixed a problem where IP addresses were not reserved properly in some cases.

 Upgrade Instructions

  1. Click Browse and locate the firmware image file which you just downloaded
  2. Click Upload
  3. Wait for the upgrade progress bar to complete and final prompt to appear.

For problems after upgrading, write all the configuration information that you changed from the defaults. Clear the configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (at least 10 seconds). Then reenter your configuration information manually.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.