D6400 Firmware Version 1.0.0.34

New Features & Enhancements

• Added Remote Genie support
• Added DFS channels support in Europe and Australia
• Wireless driver update for CE 2.4GHz power issue
• Removed IPTV / DHCP option 60 in Setup Wizard while it’s set to UK/Sky and VDSL mode
• Added ISP option list in Setup Wizard in ETH-WAN DHCP mode
• Wireless AP mode picture update (for D6400)
• DSL quick scan table updated
• Added DFS channels support in Europe and Australia
• Removed the Setup Wizard log
• Added IPTV option in Setup Wizard for known ISP, It will bridge LAN4 and VDSL VLAN 30 interface
• Disabled VLAN option in Setup Wizard page (user cannot change it in Setup Wizard)
• Wording change in Internet Setup page / Router Status page: WAN1 to Internet, WAN2 to IPTV
• Added “WAN2 bridge to LAN4” option in Internet Setup page
• Added XAgent (Remote Genie) support
• Updated DSL PHY driver and enable SRA and G.INP support
• Added NA sku support
• Internal wireless parameter change : watchdog from 60000 msec to 3000 msec for Home IOT issues

Bug Fixes

• Fixed the issue with Wireless Setup page on Chrome browser
• Fixed the issue where OpenVPN information incorrect in non-English version
• Fixed the issue where upgrading the FW through internet crashes the router
• Fixed some issues happened in WPA/WPA2 Enterprise Test
• Fixed the issue where Asia 5GHz GUI channel can't set 36,40
• Fixed the issue where router statistics show incorrect LAN interface uptime
• Fixed the issue where BT WAN detection fail at ETH mode while IPTV is enabled
• Fixed the issue where LAN PC doesn't get IP address from WAN when enable IPTV from VLAN / Bridge Setup page
• Fixed the SoapAPI: Many API run failed during SOAP testing
• Fixed the issue where browse button is not translated into Chinese on Setup Wizard restore router settings page
• Fixed the issue where there is no ReadySHARE Vault option in USB function
• Fixed the issue where Wireless client can't connect to router when its security mode is WPA/WPA2 Enterprise with EAP-TLS authentication
• Fixed SOAP vulnerability (Need password requirement for SOAP API)

Known Issues:

• PnP-X driver is not ready
• IPTV / VLAN Setup is not ready

To Install

Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.

1. Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
2. Download and extract the new firmware to a convenient place such as your desktop.The filename after extracting is D6400-V1.0.0.34_1.3.34.chk
3. Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
4. Click ADVANCED tab > Administration > Firmware Upgrade. 
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step.
   

Important Note:

1. The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
2. If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade.  After firmware upgrade is done and boots up the system, it changes to steady amber color.
   Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it  may result to a corrupt firmware and cause the device not to work.
   

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.