DGN2200v3 Initial Firmware Version 1.1.00.10

Known Issues

  1. When managing the unit remotely the management interface takes too long to show up (about forty seconds).
  2. A supported 3 terabyte USB hard drive may take up to a minute to attach.
  3. When the DGN2200v3 has a fixed IP address the Attached Devices (under the Maintenance menu) will not show up correctly.
  4. In Attached Devices some wireless devices may show up as wired.
  5. There is an issue with Wi-Fi Protected Setup (WPS) with the WN111v2 wireless client.

To Upgrade

To reach the Upgrade menu, click Router Upgrade from the Maintenance section. To upload new firmware:

  1. Download using the button below, saving to a convenient place such as your desktop.
  2. Using a browser, login to the router as admin.
  3. Under Maintenanceclick Router Upgrade.
  4. Click Browse and locate the upgrade (.img) firmware image file you just downloaded
  5. Click Upload. Wait for the upgrade progress bar to complete and final prompt to appear.

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.

 

Document Type

Downloads > Driver/Software/Firmware
Published 11/29/2011 02:40 AM   |   Updated 11/29/2011 02:40 AM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.